Cones

Cones

$27.95$107.64

Set Screw cones that lock onto shafts available in multiple sizes and tapers.

Clear
SKU: N/A Category:

Description

Items Table:
ItemDescription
1000/CN1875SS1” CONE, 30 degrees X 1.875” O.D., with 2 set screw
1000/CN2375SS1” CONE, with 30 degree taper, 2 3/8” O.D., and set screw
1250/CNSS23751 1/4′ CONE, with set screw, 2 3/8′ O.D. and 30 degree taper
1500/CN23751 1/2′ CONE, with set screw, 2 3/8′ O.D. and 30 degree taper
1500/CN3.51 1/2′ CONE, with 3.5′ O.D. and set screw
1500CN/3.5/1.75L1 1/2′ CONE, 3.5′ O.D., 1.750′ +/- .025′ long, with 40 degree taper
15MM/CN187515MM CONE, tapered 30 degrees to 1.875′ OD, with set screw
20MMCN47MM/CB/SS20mm cone, with 47mm O.D., counterbore to slide over housing, and two 6mm set screws
20MMCN60MMCB/SS20mm cone, with 60mm O.D., counterbore to slide over housing, and two 6mm set screws
22MM/CN25X4722mm Cone, 30 degree angle, tapered from 47mm to 25mm outside diameter
25MMCN47MMSS25mm cone, with 47mm O.D., counterbore, and two 6mm set screws
30MMCN60MMSS30mm cone, with 60mm O.D., counterbore, and two 6mm set screws
35MM/CNSS300035mm Cone, with 3” O.D. and 2 set screws
40MM/CNSS275040mm X 30 degree tapered, 2 3/4′ o.d. cone with set screw
500/CN18751/2′ CONE, with 1 7/8′ o.d. and 30 degree taper, no set screw
625/CN13125/8′ CONE, with 1 set screw, 30 degree taper, and 1 5/16′ outside diameter
625/CN15005/8′ CONE, with 30 degree taper X 1 1/2′ outside diameter, and 1 set screw
625/CN15625/8′ CONE, with 30 degree taper X 1 9/16′ outside diameter, and 1 set screw
625/CN18755/8′ CONE, with 2 set screws, 30 degree taper, and 1.875′ outside diameter
750/CN18503/4′ CONE, 30 degree taper X 1.850′ o.d.
750/CN20003/4′ CONE, with 30 degree taper X 2′ outside diameter, and 1 set screw
750/CN2000DP3/4′ CONE, with 30 degree taper X 2′ outside diameter, and 1 set screw, and drive pin
750/CN22503/4′ CONE, with 30 degree taper X 2.250′ outside diameter, and 1 set screw
750/CN1875/SS3/4” CONE, with 1 7/8” o.d. and 30 degree taper, two set scews
750/CN2250DP3/4′ CONE, with 30 degree taper X 2.250′ outside diameter, and 1 set screw, and drive pin

Reviews

There are no reviews yet.

Be the first to review “Cones”

Your email address will not be published. Required fields are marked *