Description
OPERATING INSTRUCTIONS FOR FW-3 FLYERS
- Set vertical arm so that spinning ring rotates with its center over center of body.
- Set horizontal arm with its ring just below top flange of spool, with wire just clearing flange.
- Loosen button head screw and adjust horizontal arm up or down, or in or out, as desired. When proper setting is achieved, retighten button head screw and test.
- Tension brake can now be set as desired. (Turn clockwise to decrease tension, counterclockwise to increase tension.)
Items Table:
Item | Description |
---|---|
FW-3 | FW-3 WIRE PAYOFF FLYER |
FW-3/2B | FW-3 WIRE PAYOFF FLYER, with 2 brakes |
FW-3/BF | FW-3 Brake Felt |
FW-3/BUSHING | .630′ ID, 1.875′ OD x .312′ LONG, 1.270′ OD x 1.260′ LONG |
FW-3/HA | HORIZONTAL ARM FOR FW-3 PAYOFF FLYER |
FW-3/SBCT | FW-3 WIRE PAYOFF FLYER, with base 2 1/2′ X 2 1/2′, no slots, and no arms |
FW-3/ST | FW-3 PAYOFF FLYER, with 1/4 – 20 hole tapped in top, no slots, and no arms |
FW-3/VA | VERTICAL ARM FOR FW-3 PAYOFF FLYER |
BRAKE ASBLY | FW-3 BRAKE ASSEMBLY |
Reviews
There are no reviews yet.